Adding and editing a virtual printer – Konica Minolta bizhub PRESS C7000 User Manual
Page 163
submit the job to print, or change the parameters of the job and
resubmit it for processing or printing.
●
Store
Files sent to this printer are spooled to the Storage area and
wait until you submit them for processing and printing. The files
remain in PDL format (such as: PS, PDF, VPS, and PPML).
In addition to using the default virtual printers, you can create a
virtual printer, and edit a virtual printer's settings.
Adding and editing a virtual printer
Add a new virtual printer and then edit job parameters of the virtual
printer.
When you add a new virtual printer, you can specify if it is
published on the network and if the virtual printer parameters will
override the PPD parameters.
1. From the Tools menu, select Resource Center.
2. In the Resource list, make sure that Virtual Printers is
selected.
3. Click +.
4. In the Name box, type a name for the new printer that you
want to add.
5. From the Based on list, select an existing printer with similar
settings.
6. The Publish on the network check box is selected by default.
Clear the check box if you do not want to publish the printer on
the network.
7. (Optional) Select the Override PPD parameters check box if
you would like the virtual printer settings to override the
parameters set in the PPD file.
8. (Optional) Select the Support dynamic page exceptions
check box if you would like the virtual printer to support files
with embedded setpagedevice commands.
9. (Optional) In the Comments box, type any comment
regarding the virtual printer parameters.
10. Click Edit to change the job parameters of your new virtual
printer.
Note: If you don't edit the job parameters, the settings of the new virtual
printer are taken from the printer on which it was based.
11. Click Save to save your changes in the job parameters
window.
12. Click OK.
The new printer appears in the virtual printer list.
Adding and editing a virtual printer
153