Konica Minolta bizhub PRESS C7000 - Manual (Page 140)

Parameter Option Description
Emulate source
paper tint Emulates the original paper tint if the tint is included in the
profile.
Notes:
● If you select Emulate source paper tint, you cannot
select Preserve pure CMY colors.
● If the job is simplex, only the front side will be printed
using the tint emulation.
● If you select Emulate source paper tint, Absolute is
used as the rendering intent.
Black Point
Compensation Activates the Black Point Compensation algorithm, which
extends the gray axis of a profile and increases detail in the
darkest color areas.
CMYK device link Enables you to select a CMYK device link profile.
RGB source
profile Enables you to select an RGB source profile.
RGB rendering
intent Provides the following options (for information on each
option, see the descriptions of the CMYK rendering intent
options in this table):
● Auto
● Relative
● Absolute
● Saturation
● Perceptual
Apply CMYK
emulation To convert RGB elements according to the selected CMYK
emulation method, select the Apply CMYK emulation. The
RGB elements receive the same look as the CMYK
elements, creating a unified appearance.
RGB device link Enables you to select an RGB device link source profile.
Destination Profile Provides the following options:
● Linked—Uses the destination profile that was linked
using the Media and Color Manager in the Resource
Center
● 80 PPM Press or 70_60 PPM Press —Uses the
predefined destination profile that is most suitable for
the press
130 Chapter 11—Job parameters