Konica Minolta bizhub PRESS C7000 - Manual (Page 26)

5. Click Open.
6. Click Add.
The network printer is defined with the PPD file.
7. In the Print & Fax window, double-click the network printer.
8. Click Utility.
9. If you are working in Mac OS X 10.6. click Open Printer
Utility.
10. In the Enable Enhanced User Interface list, make sure that
On is selected.
11. In the Server Hostname box, type the IP address of the
server.
12. Click Apply, and then click Close.
Removing the Print Driver software in Mac OS X (10.4, 10.5,
and 10.6)
Perform this procedure if you need to upgrade to a later software
version of the Print Driver software.
Requirements:
All applications must be closed.
1. From the Go menu, select Connect to Server.
2. In the Server Address box, type your Creo color server host
name or address, and click Connect.
3. In the Connect as area, select Guest.
4. Click Connect.
5. Select Utilities, and then click OK.
6. Select the Mac Utilities folder.
7. Double-click the CCSUninstall.dmg file.
8. Double-click the CCSUninstall.app file.
9. Close all the running applications on your Mac computer, and
then click OK.
10. Select the suitable Creoprinter driver, and then click OK.
11. If necessary, type your name and password, and then click
OK.
12. Click OK.
The Print Driver software is removed. You can now upgrade the
Print Driver software.
Note: You will need to reinstall the network printers that you removed after
you have upgraded the software.
16 Chapter 2—Setting up your computer for printing