Konica Minolta bizhub PRESS C7000 - Manual (Page 191)

9. In the Master Template list, select the template to base the
driver on.
The Transaction Power Kit has predefined driver templates. It
is recommended that you use these driver templates when
adding an IPDS driver.
10. Click Input Trays, and configure the parameters as required.
11. Click Save Changes, and then click Back.
12. Click Output Bins, configure the parameters as required, click
Save Changes, and then click Back.
13. Click Miscellaneous, configure the parameters as required,
click Save Changes, and then click Back.
14. Click Save Changes.
Modifying an IPDS driver
Modify an IPDS driver by updating the IPDS parameters.
Requirements:
The IC-307 print controller must be running.
1. Double-click the Transaction IPDS shortcut on the desktop.
The page displays the Transaction IPDS software.
2. Select Actions > Login.
3. In the Account Name list, select admin.
4. In the Password box, type admin.
5. Click Login.
6. Select Configuration > Drivers.
7. Next to the driver that you want to configure, click Input
Trays, and update the parameters as required.
8. Click Save Changes, and then click Back.
9. Next to the driver that you want to configure, click Output
Bins, update the parameters as required, click Save
Changes, and then click Back.
10. Next to the driver that you want to configure, click
Miscellaneous, update the parameters as required, and add
your own configuration notes (optional).
11. Click Save Changes, and then click Back.
12. Click Save Changes.
Modifying an IPDS driver 181