Campbell Scientific CR9000X Measurement and Control System - Manual (Page 22)

Quick Start
QS2.3 Program Generator Scan Window
Enter 100 for the number of Scans
to Buffer. This sets the number
of scans that processing can la
measurements without having
skipped scans (loss of data). The
number of Scans to Buffer is
limited by the available memory
g
in SRAM
Click on Done
to save your
selections.
SCAN RATE
The values entered here set the scan rate of the program which determines how often the
measurements are made. You may use the scroll bar to set the time value or type the numeric time
value directly into the Scan Interval box. Enter 10 in the Scan Interval box and select mSeconds for
the units. This will create a program that scans 100 times a second.
QS-14