Campbell Scientific CR1000 Measurement and Control System - Manual (Page 566)

Appendix F. Other Campbell Scientific Products
566
F.6.5 Primary Power Sources
Table 148. Primary Power Sources
Model Description
9591
18-Vac, 1.2-A wall-plug charger (accepts 110-Vac mains
power, requires regulator)
14014
18-Vdc wall-plug charger (accepts 90- to 264-Vac mains
power, requires regulator)
SP5-L 5-Watt solar panel (requires regulator)
SP10 10-Watt solar panel (requires regulator)
SP10R 10-Watt solar panel (includes regulator)
SP20 20-Watt solar panel (requires regulator)
SP20R 20-Watt solar panel (includes regulator)
SP50-L 50-Watt solar panel (requires regulator)
SP90-L 90-Watt solar panel (requires regulator)
DCDC18R
12-Vdc to 18-Vdc boost regulator (allows automotive
supply voltages to recharge sealed, rechargeable batteries)
Table 149. 24-Vdc Power-Supply Kits
Model Description
28370 24-Vdc, 3.8-A NEC Class-2 (battery not included)
28371 24-Vdc, 10-A (battery not included)
28372 24-Vdc, 20-A (battery not included)
F.7 Enclosures
Table 150. Enclosures
Model Description
ENC10/12
10-inch x 12-inch weather-tight enclosure
(will not house CR3000)
ENC12/14
12-inch x 14-inch weather-tight enclosure. Pre-wired
version available.
ENC14/16
14-inch x 16-inch weather-tight enclosure. Pre-wired
version available.
ENC16/18
16-inch x 18-inch weather-tight enclosure. Pre-wired
version available.
ENC24/30 24-inch x 30-inch weather-tight enclosure
ENC24/30S Stainless steel 24-inch x 30-inch weather-tight enclosure