Campbell Scientific CR1000 Measurement and Control System - Manual (Page 560)

Appendix F. Other Campbell Scientific Products
560
F.1.2 Wireless Sensor Network
Wireless sensors use the Campbell wireless sensor (CWS) spread-spectrum radio
technology. The following wireless sensor devices are available.
Table 129. Wireless Sensor Modules
Model Description
CWB100 Series Radio-base module for datalogger.
CWS655 Series Near-surface volumetric soil water-content sensor
CWS900 Series Configurable, remote sensor-input module
Table 130. Sensors Types Available for Connection to CWS900
Air temperature Relative humidity
Dissolved oxygen Soil heat flux
Infrared surface temperature Soil temperature
Leaf wetness Solar radiation
Pressure Surface temperature
Quantum sensor Wind speed / wind direction
Rain
F.2 Sensor Input Modules
Input peripherals expand sensor input capacity, condition sensor signals, or
distribute the measurement load away from the datalogger.
F.2.1 Analog Input Multiplexers
Analog multiplexers increase analog-input capacity beyond the channels integral
to the CR1000. Excitation channels can also be multiplexed.
Table 131. Analog Multiplexers
Model Description
AM16/32B
64 channels - configurable for many sensor types.
Muliplex analog inputs and excitation.
AM25T
25 channels - designed for thermocouples and differential
inputs