beautypg.com

1 frequency resolution, P. 318) – Campbell Scientific CR1000 Measurement and Control System User Manual

Page 318

background image

Section 8. Operation

318 

 

 

Using a pull-up resistor on digital I/O channels C1 - C8

8.1.5.3.1 Frequency Resolution

Frequency resolution of a PulseCount() frequency measurement is calculated as

where:

FR  = Resolution of the frequency measurement (Hz) 

S  = Scan Interval of CRBasic Program 

Resolution of TimerIO() instruction is:

where:

FR  = Frequency resolution of the measurement (Hz) 

R  = Timing resolution of the TimerIO() measurement =  

P  = Period of input signal (seconds).  For example, P = 1 / 1000 Hz = 
0.001 s 

E = Number of rising edges per scan or 1, whichever is greater.