Campbell Scientific CR1000 Measurement and Control System - Manual (Page 565)

Appendix F. Other Campbell Scientific Products
565
F.6.2 Batteries
Table 145. Batteries
Model Description
BPALK D-cell, 12-Vdc alkaline battery pack
BP12
12-Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
BP24
24-Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
BP84
84-Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
F.6.3 Battery Bases
The CR1000 is supplied with a base option. Battery base options include either
alkaline batteries or sealed rechargeable batteries. A third option is a simple
protective base and the CR1000 is supplied power from an external source.
Table 146. CR1000 Battery Bases
Model Description
10695 (-NB)
Base with no battery. An external 12-Vdc power supply
must be used.
10519 (-ALK) Base with ten alkaline D-cell batteries.
10518 (-RC)
Rechargeable base with two 6-Vdc, 7-Ahr, sealed-
rechargeable batteries. Must be trickle charged with a
primary source.
F.6.4 Regulators
Table 147. Regulators
Model Description
CH100 12-Vdc charging regulator (requires primary source)
CH200 12-Vdc charging regulator (requires primary source)