Triton Perspective - Manual (Page 72)

64 | P a g e F e b r u a r y 2 0 1 1
There are also two check boxes in the Projections tab, related to import and export
projections.
Auto set Export Projection to UTM/WGS84: As specified, this requires that the input files
are in latitude and longitude coordinates. Checking this box will export the data in the same
projection as displayed in the Map View.
Ask to use current import projection: This will prompt the user during the file import process
and ask whether to use the current projection. If the current projection is not satisfactory, an
import projection wizard will launch.
3.5.1 Import Projection Settings
The import projection wizard is identical for the XTF, GeoTiff, XYZ, and Contact projection
settings.
The default import projection is un-projected latitude and longitude in WGS84. When the
first file is loaded into a new project, the import projection wizard will launch and the
projection can be set at that time.
Alternatively, the user can preset the import projection using the Program Settings option
described below.
Selecting 'Change' under any of the top four options in the Projections tab of the Program
Settings will launch the import projection wizard shown below:
On this page, select the projection to use. If a custom projection is needed, select the