Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 71)

PFadvantage DICKEY-john Land Manager
Ag Leader Technology Application Rate Mode
September 2003 2-59
3. Press EXIT key to return to screen with ADVANCED
SETTINGS key on bottom. Press the ADVANCED
SETTINGS key.
Target Rate Outside Field: This only pertains to using a
.tgt prescription file.
Set to ZERO if want rate outside field to be zero.
Set to USE LAST if want rate to be the last rate used at
the time the vehicle is detected outside the field. This is
useful when the vehicle is being falsely detected outside
of the field during the outside pass.
Set to TGT DEFAULT if want rate outside field to be the
default rate stored in the .tgt prescription file.
Controller Time Delay: Set to 3 seconds. This is delay of
controller to change application equipment to new rate + 2
seconds.
Actual Rate Units: Ignore this setting.
Log Actual Rate: Set to YES to log actual rate to card. Set
to NO, otherwise.
This completes all the settings for one configuration. Press
EXIT key twice to return to screen showing all
configurations or press EXIT key 3 times and menu key to
return to main operating system.