Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 68)

DICKEY-john Land Manager PFadvantage
Application Rate Mode Ag Leader Technology
September 2003 2-56
Setup for a
DICKEY-john
Land Manager or
Land Manager II
controller
Complete the following steps to set up for Land Manager or Land
Manager II controllers.
A separate configuration of settings should be created for every
product applied. A maximum of 16 different configurations can
be created. The screen below illustrates two configurations set up
for a DICKEY-john.
1. Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear.
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
Treflan Land Manager NA
Roundup Land Manager NA
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key to set up a new configuration or select
an existing configuration and press the EDIT SETTINGS key.
A new screen appears with the following settings. Select each
setting and press EDIT key to change the settings.
Controller Make: Set to DICKEY-JOHN. This setting can not
be changed once the configuration is used by one or more fields.
Controller Model: Set to LAND MANAGER. This setting can
not be changed once the configuration is used by one or more
fields.