Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 153)

PFadvantage Fields and Loads
Ag Leader Technology All Modes
September 2003 4-3
Creating/Naming
Fields and Loads Instructions for creating and naming fields and loads are in the setup
section.
Changing Fields
and Loads The field and load are changed at the main operating screen. The active
field and load are displayed on the top line of the main operating screen.
Changing Field
Press the FIELD key to advance to the field-changing screen. You will
have to press the FIELD key twice if load is displayed on the top line (load
appears as “L1:”) of the main operating screen.
Press the UP or DOWN ARROW keys to scroll through the fields. Press
the ACCEPT key to change to a different field.
Changing Load
Press the LOAD key to advance to the load-changing screen. You will
have to press the LOAD key twice if field is displayed on the top line (field
appears as “F1:”)
Press the UP or DOWN ARROW keys to scroll through the loads. Press
the ACCEPT key to change to the different load.
* * *