Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 21)

PFadvantage Card Setup
Ag Leader Technology All Modes
September 2003 2-9
FILES OPTIONS
File Name 02081501.YLD
File Size 132640 bytes
Last Modified 13:42
Date 08/15/2002
COPY TO RESTORE ERASE
FILE FILE FILE
EXIT
Changing a Setting Step Action
1 Use the UP or DOWN ARROW keys to select the item you want
to change. The item is selected when a black filled rectangular
box surrounds the entire line.
2 Press the EDIT key and then use the UP or DOWN ARROW keys
to change the number or setting.
3 Once you have changed a setting press the ACCEPT key. Press
the EXIT key once you have made all the settings.
Logging Device If you are using the GPS receiver with the PFadvantage you must use a
memory card to save the instantaneous GPS data.
If you... Select
Do not have a GPS receiver. NONE
Do have a GPS receiver. MEMORY CARD
NOTE: In Application Rate mode, if the PFadvantage is controlling
application rate, but you don’t want to log actual rate to card set to NONE.
Logging Interval This setting determines how often the GPS information is saved to the
memory card. It also affects how large an area each GPS record will
represent on a map and how many logging hours are available before the
memory card becomes full.
There are three possible settings for the logging interval.
1, 2 or 3 Seconds
. The recommended setting is either two or three seconds.
Distance Traveled (ft)
1 sec 2 sec 3 sec
3 mph 4.4 8.8 13.2
5 mph 7.3 14.6 21.9