Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 49)

PFadvantage Grain Setup
Ag Leader Technology Harvest Mode
September 2003 2-37
Changing C11 Step Action
1 You must display the weight calibration screen.
Press the following keys to view the weight calibration screen:
MENU key
CAL key
WEIGHT key
2 Refer to the screens on the next page and press the UP or DOWN
ARROW keys to set a grain type that you will harvest. Press the
SHOW CAL NUMBERS key.
3 Use the DOWN ARROW key to select C11 number (a line is
selected when the entire line is surrounded by a black filled box).
4 Press the EDIT key. Use the UP or DOWN ARROW keys to set
the correct number according to the Initial Calibration Sheet.
Press the ACCEPT key.
5 Press the EXIT key once to return to the previous screen. Repeat
steps 2-4 and set C11 for all the grain types you will harvest.
6 Press the EXIT key twice to return to the main operating screen.
NOTE: You may not be able to set C11 to the exact number that is on the
Initial Calibration Sheet. C2-C10 numbers also may not exactly agree
with the Initial Calibration Sheet. If this is the case, set C11 as close to the
initial number as possible.