Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 4)

General PFadvantage
Ag Leader Technology
September 2003 1-2
Limited Warranty Ag Leader Technology will repair or replace at no charge any component of the
PFadvantage system that fails during normal service on the equipment model that the
system was intended for use within two years from the warranty start date.
The warranty start date will initially be set to the date on which your product is
shipped from Ag Leader Technology.
If you return the registration/warranty card included with this manual within 30
days of purchasing this product from your dealer, the warranty start date will be
changed to the date that you purchased this product from your dealer. Ag Leader
Technology reserves the right to request proof of the date stated on your
registration/warranty card.
Warranty is not provided for damage resulting from abuse, neglect, accidents, vandalism,
acts of nature, or any other causes that are outside the normal, intended use of the
PFadvantage system.
Ag Leader Technology shall not be liable for indirect, incidental, or consequential
damages to the dealer, end user, or third parties arising from the sale, installation, or use of
the PFadvantage system.
Service If you have a problem with your system, call your Ag Leader Technology dealer
or call us directly at the phone number below. If we determine you have a
hardware failure, we will ship replacement hardware immediately. Our mailing
address and phone numbers are:
Ag Leader Technology
2202 South Riverside Drive
P.O. Box 2348
Ames, IA 50010
Phone: 515-232-5363
Fax: 515-232-3595
Note: Return failed hardware to us by UPS (preferred) or US mail.
Copyright Notice Ag Leader Technology has copyrighted (
©2002) the contents of this manual and
the operating program for the PFadvantage system. No reproductions of this
material may be made without first obtaining the consent of Ag Leader
Technology.
Proprietary
Technology Notice The PFadvantage system has patents on its design and operational features.
Copying features of this system relating to measurement and calculation of grain
flow and weight, or organization of field and load data may result in patent
infringement.