Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 116)

Direct Drive – Accu-Rate PFadvantage
Application Rate Mode Ag Leader Technology
September 2003 2-104
Product: Press EDIT key. You can select an existing product
and press ACCEPT key or create a new product by pressing
CREATE NEW key. Press EDIT NAME key and enter name
of hybrid or variety. Use Left or Right Arrow keys to select a
character. Use Up or Down Arrow key to change the character.
To erase a character in the name, highlight that character and
use UP or DOWN ARROW key to scroll to the blank space
between "9" and "A". Set each character and press ACCEPT
key twice.
Units: This is the Units/Acre of application. Set to SEEDS if
planting. Set to GALLONS if applying liquid. Set to
POUNDS or TONS if applying fertilizer.
Ground Speed Sensor: Set to RADAR or GPS. GPS setting
must not be used when planting. It can be used for fertilizing.
The Pro acquires speed from GPS once per second which is not
adequate for planting.
App Distance From GPS: Set to distance between planter
toolbar and position of GPS antenna on tractor. Example: If
toolbar is 20 feet behind GPS antenna set to 20 ft back.
Full Swath: Set to full swath of applicator. When planting set
to # of rows x Row Spacing in feet. Example: 12 row planter,
30 inch row spacing. 12x2.5ft=30 ft
Tgt Units:Contrler Units: Normally set to 1:1.0000. This ratio
is used to convert the units in a target file (.tgt) to the units of
application.
Target Rate Increment: This determines the increment value
by which you can change the manual target rate with each press
of Up or Down arrow keys. Set to 500.0 or 1000.0 if planting
corn. Set to 1000.0, 5000.0 or 10000.0 if planting beans. Set to
0.1, 1.0 or 10.0 if applying liquid or dry fertilizer.