Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 130)

Calibrating for Vibration (C1) PFadvantage
(Harvest Mode) Ag Leader Technology
September 2003 3-8
Step Action
1 Use the UP or DOWN ARROW keys to choose the grain type.
2 Engage the separator and run it at full engine speed with no grain
flow. Press the PERFORM CAL key. A countdown will begin on
the monitor display.
3 After the monitor counts down 60 seconds, a number for C1 is
displayed. Press the ACCEPT key.
NOTE: C1 should be between 0 and 250.
4 Press the EXIT key once you have finished calibrating for vibration.
NOTE: You should have the head that you will use to harvest the grain on
the combine before you perform a vibration calibration for any grain.
* * *