HP StorageWorks XP Remote Web Console Software - Manual (Page 73)

Performing XP Remote Web Console Operations 73
Table 3-5 Operation and Terms Displayed in Audit Log File
Delete-Lu (Force) ( Note 1 )
Alternate Path
(ADD / Delete / Priority UP /
Priority Down) Alternate-Path ( Note 1 )
Check Paths & Restore Vol. ChkPath-RestoreVol ( Note 1 )
Disconnect Subsystem / Disconnect
Volume Disconnect-Volume ( Note 1 )
Disconnect Paths Disconnect-Paths ( Note 1 )
Check Paths Check-Paths ( Note 1 )
Change Parameter Wwn Timer ( Note 1 )
Restore / LDEV Restore LDEV Volume-Restore(F) ( Note 1 )
Port Operation Change to Target / Change to
External PORT Change Port
Create Pair Paircreate ( Note 1 ) Flex Copy
Delete Pair
CSC
Pairsplit-S ( Note 1 )
CFL Configuration File
Loader
Upload CFL LUNM Operation
Note: The log information is not
output for the format violation and
inconsistency of configuration.
License Key Install PP Install ( Note 1 ) ( Note 2 )
SNMP Uninstall PP Uninstall ( Note 1 ) ( Note 2 )
File PP Install from File
License Key
Apply
PP Key
PP Apply
SNMP Set SNMP Agent SNMP Set SNMP Agent
Release Release LUN ( Note 1 )
Extend Release Cache ( Note 1 )
On Demand
Extend
JIT
Release Cache / CLPR ( Note 1 )
Partition Definition Apply
(Create SLPR / Delete SLPR / Create
CLPR / Delete CLPR / Paste CLPR,
Port / Paste PG / SLPR Parameter /
CLPR Parameter)
VPM Set
On Demand
License Key
Partition Definition Apply PP Key SLPR PP Charge
Note 1: When two or more settings of the same type are applied to the subsystem at one time, the log
information is output as one entry.
Note 2: When one or more settings that are applied at one time end abnormally, the output log information will
be Error, not Warning.
Note 3: When two or more LUN Manager operations are performed, the following parameters apply:
• When two or more operations are performed on one target and then the Apply button is clicked, the log
information is output as one entry.
• When two or more settings are applied at one time, the log information is output according to the priority
shown in