HP StorageWorks XP Remote Web Console Software - Manual (Page 45)

Installation Requirements and Procedures 45
The Partition Status list displays the following information for the selected product option:
• SLPR Name – the storage logical partition name.
• Used Volumes – the amount of licensed capacity that is currently being used.
• Status – the volume status, which is determined by comparing the allocated licensed capacity (Permitted
Volumes) and used licensed capacity (Used Volumes):
• Installed: License capacity for this option has been allocated to the SLPR. If the license capacity is
limited, this indicates that the partitioned licensed capacity is allocated to the SLPR and the allocated
licensed capacity is more than the capacity of Used Volumes. A storage partition administrator can use
the product in the allocated SLPR.
• Not Installed: No license and licensed capacity for the selected product are allocated to the SLPR.
• Capacity Insufficient: The licensed capacity that is allocated to the SLPR (Permitted Volumes) is less than
the currently used licensed capacity (Used Volumes). When the trial period still remains, the number of
remaining days is displayed in parentheses.
• Permitted Volumes – displays nothing when a product option with unlimited licensed capacity is selected in
the list. It displays the allocated licensed capacity to the SLPR in GB when the product with limited licensed
capacity is selected in the list.
If you select a product with unlimited license capacity, or one where the licensed capacity is not relevant, the
Setting box looks like Figure 2-35.
Figure 2-35 Setting Box (Licensed Capacity Unlimited or Not Relevant)
• The Enable button enables the license key for the selected product.
• The Disable button disables the license key for the selected product.
If you select a product with a limited license capacity, the Setting box looks like Figure 2-36. This lets you enter
the licensed capacity you want to allocate to the SLPR.
Figure 2-36 Setting Box (License Capacity Limited)
• The Set button selects the setting. The selected row of the product list and the Partition Status list change to
blue bold italics , and the displayed capacity in the Remaining Capacity field changes to the new
capacity.
The setting is not implemented until you click Apply.
• The Apply button implements the setting in the subsystem.
• The Cancel button cancels the setting.