HP StorageWorks XP Remote Web Console Software - Manual (Page 112)

Configuration File Loader 112
5-3 LUN Manager Spreadsheet Settings
The following LUN Manager functions can be defined by using Configuration File Loader:
• Channel Adapter (CHA) settings allow you to change the PCB mode. See section 5-3-2 .
• Port Settings allow you to change the settings for arbitrated loop-physical address (AL-PA), data transfer
speed (host speed), and topology. You can also change the Secure Manager XP setting. See section 5-3-3 .
• Host Group Settings allow you to create, delete, or change the host group. See section 5-3-4 .
• WWN settings allow you to add, delete or change the WWN information. See section 5-3-5 .
• LU path settings allow you to add, delete, or change LU paths. See section 5-3-6 .
• Command Device settings and set or release the command device and command device security. See
section 5-3-7 .
5-3-1 Column Format
The LUN Manager spreadsheet allows you to write the settings for CHA mode, port, host group, WWN, path
definition, and command devices. The format of the LUN Manager spreadsheet is as follows:
• 1st column to 6th column: Current settings area
• 7th column to 10th column: Blank columns
• 11th column to 16th column: New settings area
The number of columns used depends on the function tag. If a particular function tag requires less than six
columns, the unused columns are left blank.
Table 5-3 describes the format of the LUN Manager spreadsheet.
Table 5-3 LUN Manager Spreadsheet Format
Function Tag Column
[CHA] [Port] [HostGroup] [WWN] [LUN] [LDEV]
1st CHA Port Port Port Port CU
2nd PCB Mode Security Switch Group ID Group ID Group ID LDEV
3rd Blank AL-PA Name WWN LUN Command Device
4th Blank Fabric Host mode Name CU Command Device Security
5th Blank Connection Host mode option Blank LDEV Blank
6th Blank Channel speed Blank Blank Blank
7th Blank
8th Blank
9th Blank
10th Blank
11th CHA Port Port Port Port CU
12th PCB Mode Security Switch Group ID Group ID Group ID LDEV
13th Blank AL-PA Name WWN LUN Command Device
14th Blank Fabric Host mode Name CU Command Device Security
15th Blank Connection Host mode option Blank LDEV Blank
16th Blank Channel speed Blank Blank
When the LUN Manager spreadsheet is exported, the settings are written up to the 10th column (blank
column).
LUN Manager spreadsheets must conform to those parameters.