HP XP P9500 Storage - Manual (Page 396)

Specify Authentication Information window
Description Item
Group name where the user is registered. Group Name
Specify the user name of the host. Up to 16 alphanumeric characters can be used. User Name
Specify the secret to be used for host authentication. Secret
Use 12 to 32 characters, including alphanumerics, spaces, and the following symbols: . - +
@ _ = : / [ ] , ~
Specify the secret again for confirmation. An error occurs if you enter incorrect characters,
and then click OK. Re-enter Secret
Edit Command Devices wizard
The System Administrator can enter RAID Manager commands from open-system hosts to perform
Continuous Access Synchronous or Business Copy operations or both on logical devices. For
example, RAID Manager commands can be used to create and split pairs. If you want to allow
the System Administrator to enter RAID Manager commands from open-system hosts, you must
specify at least one logical device as the command device. If desired, you must also apply command
device security to other logical devices in the storage system.
Use Edit Command Devices window to edit command devices.
396 LUN Manager GUI reference