HP XP P9500 Storage - Manual (Page 261)

Description Item
Security: Displays the setting (enable or disable) of Command Device
Security. Command Device Attribute
• User Authentication: Displays the setting (enable or disable) of user
authentication.
•
Device Group Definition: Displays the setting (enable or disable) of
Device Group Definition.
Displays the number of paths of the selected LDEV. Number of Paths
If the component of the LUSE volume is selected, a hyphen (-) is displayed.
Displays the UUID. UUID
Displays the ID and name of the CLPR in the ID:CLPR-name format. CLPR
Displays the access attribute of the LDEV. Access Attribute
Displays the SSID. SSID
Displays the cache mode. Cache Mode
Displays the page status. Page Status
Displays the current processor blade ID. Current MP Blade ID
Displays the current processor blade name. Current MP Blade Name
Displays the assigned processor blade ID. Assigned MP Blade ID
Displays the assigned processor blade name. Assigned MP Blade Name
Displays the resource group name and ID of the LDEV. The ID is provided
in parentheses. Resource Group Name (ID)
Displays the tiering policy. Tiering Policy
Tiering Level: Displays the tiering level.
New Page Assignment Tier: Displays the new page assignment tier.
Displays the tier relocation setting. Tier Relocation
Displays the relocation priority setting. Relocation Priority
LUNs table
This table is not displayed if the path is not set.
Description Item
Port name. Port ID
Host group name. Host Group Name
Identifier of the logical unit. LUN ID
Hosts table
This table provides information about the host that can view LDEVs. This table is not available if
the WWN is not registered in the host to which the path is set.
Description Item
WWN of the host that can view LDEVs. HBA WWN
Host name. Host Name
LDEV Properties window 261