HP XP P9500 Storage - Manual (Page 367)

Description Item
Size of each logical volume. Capacity
LDEV attribute
Displays the attribute of the LDEV. Attribute
• Command Device: Command device.
•
Remote Command Device: Remote command device.
• Reserved VOL: Reserved volume.
•
TSE: TSE-VOL.
•
Nondisruptive Migration: Volume for the nondisruptive migration.
• -: Volume in which the attribute is not defined.
Information in this topic assumes only a single task is executed. If multiple tasks are executed, the
window shows all configuration items. To check information of a configuration item, click Back to
return to the configuration window, and then click Help
Edit Host wizard
Use this wizard to edit host parameters.
If you want to change multiple parameters for a host two or more times, wait until the current task
finishes, and then change the next settings.
If you attempt to change the settings again before the current task finishes, only the setting in the
second task will be applied, so the result might be different from what you expected.
Edit Host window
Description Item
Specify the WWN of the port in 16 digits of hexadecimal numbers. HBA WWN
Specify the host name. Host Name
Host name can be up to 64 single-byte ASCII characters (alpha-numerals
and symbols).
You cannot use the following symbols: \ / : , ; * ? " < > |
Edit Host wizard 367