HP XP P9500 Storage - Manual (Page 154)

4. Select Edit Ports.
5. In the Edit Ports window, select the Address (Loop ID) check box, and then select the address.
6. Click Finish.
7. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Addresses for fibre channel ports
The following addresses are available for setting fibre channel ports.
Loop ID
(120~125)
AL-PA Loop ID
(90~119)
AL-PA Loop ID
(60~89)
AL-PA Loop ID
(30~59
AL-PA Loop ID
(0~29)
AL-PA
120 10 90 49 60 76 30 B4 0 EF
121 0F 91 47 61 75 31 B3 1 E8
122 08 92 46 62 74 32 B2 2 E4
123 04 93 45 63 73 33 B1 3 E2
124 02 94 43 64 72 34 AE 4 E1
125 01 95 3C 65 71 35 AD 5 E0
- - 96 3A 66 6E 36 AC 6 DC
- - 97 39 67 6D 37 AB 7 DA
- - 98 36 68 6C 38 AA 8 D9
- - 99 35 69 6B 39 A9 9 D6
- - 100 34 70 6A 40 A7 10 D5
- - 101 33 71 69 41 A6 11 D4
- - 102 32 72 67 42 A5 12 D3
- - 103 31 73 66 43 A3 13 D2
- - 104 2E 74 65 44 9F 14 D1
- - 105 2D 75 63 45 9E 15 CE
- - 106 2C 76 5C 46 9D 16 CD
- - 107 2B 77 5A 47 9B 17 CC
- - 108 2A 78 59 48 98 18 CB
- - 109 29 79 56 49 97 19 CA
- - 110 27 80 55 50 90 20 C9
- - 111 26 81 54 51 8F 21 C7
- - 112 25 82 53 52 88 22 C6
- - 113 23 83 52 53 84 23 C5
- - 114 1F 84 51 54 82 24 C3
- - 115 1E 85 4E 55 81 25 BC
- - 116 1D 86 4D 56 80 26 BA
- - 117 1B 87 4C 57 7C 27 B9
154 Managing logical volumes