HP XP P9500 Storage - Manual (Page 244)

Selected LDEVs table
Description Item
LDEV identifier, which is the combination of LDKC, CU, and LDEV. LDEV ID
LDEV name, including the combination of prefix characters and the initial
number. LDEV Name
Parity group identifier. Parity Group ID
Pool name (pool identifier). Pool Name (ID)
Drive type and rpm in use on this LDEV. Drive Type/RPM
RAID level. An asterisk "*" indicates that the parity group to which the
LDEV belongs is interleaved (concatenated). RAID Level
Emulation type. Emulation Type
LDEV capacity. Capacity
Type of LDEV. Provisioning Type
• Basic: Internal volume.
•
THP: THP V-VOL.
•
External: External volume.
• Snapshot: Snapshot volume.
Format type. Format Type
Storage system identifier in hexadecimal format. SSID
Cache logical partition number, in ID:CLPR format. CLPR
For detailed information about CLPRs, see the HP P9000 Performance for
Open and Mainframe Systems User Guide.
Processor blade identifier. If Auto is selected, the ID is automatically
assigned. MP Blade ID
Indicates whether the LDEV is being used as the system disk. System Disk
•
Yes: System disk.
• No: Not system disk.
Displays whether Smart Tiers or Smart Tiers Z is enabled or disabled. Multi-Tier Pool
• Enable: The LDEV for Smart Tiers or Smart Tiers Z is displayed.
•
Disable: The LDEV for Thin Provisioning or Thin Provisioning Z is
displayed.
Tiering level and new page assignment tier assigned to the LDEV. Tiering Policy
Displays the attribute of the LDEV. Relocation Priority
TSE: TSE-VOL.
Hyphen (-): Volume in which attribute is not defined.
A hyphen (-) is displayed. Attribute
Resource group name and ID of which this LDEV is a member. Resource Group Name (ID)
Edit LDEVs wizard
Use this window to change the LDEV name.
244 LDEV GUI reference