HP LeftHand P4000 SAN Solutions - Manual (Page 259)

4. Remove the top cover ( Figure 128 (page 259) ):
a. Loosen the screw on the top cover with the T-10 wrench.
b. Press the latch on the top cover.
c. Slide the cover toward the rear of the server and then lift the top cover to remove it from
the chassis. Lift the top cover away from the chassis.
Figure 128 Removing the cover
5. Locate and remove the PCI cage:
a.
Loosen the thumbscrews that secure the PCI cage to the system board and remove the
screw that secures the PCI cage to the rear of the server (1,
Figure 129 (page 259) ).
b. Lift the PCI cage away from the system board (2, Figure 129 (page 259) ).
Figure 129 Removing the PCI cage
Replacing the RAID controller 259