Badger Meter ORION Classic (CE) - Manual (Page 55)

Network Communication Test - ORION Cellular Endpoint
1 Select ORION Network Communication Test on the
ORION Endpoint Utility menu
2 Align the IR optical head with the endpoint IR LED
port
NOTE: N For ORION Cellular endpoints, swipe with
the magnet to place the endpoint in active
IR mode
3 Tap Initial Read
Figure 90: Initial Read to start test
Result: Endpoint type, serial number and reading is displayed.
4 (Optional) Tap Capture GPS if you want to enter a GPS location
Result: The capture gPS location screen appears.
• If the handheld has built-in GPS, the latitude/longitude (Lat/Long) values fill in automatically Tap the Lock In
button to lock in the lat/long values
• To enter lat/long manually, tap to select the Manual Entry box Use the onscreen keyboard or the handheld
keypad to enter the values
NOTE: N The minus sign and the decimal point are on the handheld keypad in the last row of blue keys
• Align the optical head of the IR cable with the endpoint IR LED port and tap Program to store the lat/long and
return to the previous screen
ORION NETWORk cOMMUNIcATION TEST
Page 55 April 2014 ORION® Endpoint Utility for Trimble® Ranger 3