Badger Meter ORION Classic (CE) - Manual (Page 28)

IR Programming Meter Size, Type and Units of Measure (RTR, ADE)
To program the meter type and size for an RTR or ADE encoder, follow these steps
1 Tap the meter Size & Type button on the Extended Status screen
2 Scroll through list (Figure 30) and tap to select the appropriate meter type and size
Result: The Extended Status screen displays with the selected meter type and size (Figure 32). The new value is highlighted
to indicate it is not yet programmed.
Figure 30: Meter size & type Figure 31: Meter unit of measure
3 Tap the Units button
4 Scroll through list (Figure 31) and tap to select the appropriate unit of measure
Result: The Extended Status screen displays and highlights the selected units of measure (Figure 32).
5 Align the optical head of the IR cable with the endpoint IR LED port
6 Tap the Program button on the Extended Status screen
Result: The endpoint connected to the RTR is programmed with the new meter type, size and units as shown in Figure 33.
The new values are no longer highlighted to indicate the values are programmed.
Figure 32: Meter type and size Figure 33: Meter type and size programmed
ORION IR PROgRAMMINg
Page 28 April 2014 ORION® Endpoint Utility for Trimble® Ranger 3