Badger Meter ORION Classic (CE) - Manual (Page 23)

Extended Status
The Ext Status button on the ORION IR Programming screen provides access to information which has been programmed
into an ORION Migratable endpoint
Figure 25: Extended Status - AdE
The type of technology displays across the bar at the top of the Extended Status screen The status fields that display are
dependent on the technology A check mark in a status field indicates a condition or alert that exists for the endpoint
When pre-wired endpoint assemblies are factory programmed, the meter size and type and the units of measure display in
the fields Meter size and type and the units of measure can also be field programmed for RTR and ENC endpoints
Examples of the Extended Status screen for the different technology types (RTR, ENC, E LCD, E-Series) are shown on the next
four pages
Title bar displays
the endpoint type
and serial number
ORION IR PROgRAMMINg
Page 23 April 2014 ORION® Endpoint Utility for Trimble® Ranger 3