Watlow EZ-ZONE RM Limit Module Rev C - Manual (Page 80)

Watlow EZ-ZONE ® RML Module • 77 • Chapter 5 Factory Page
RM Limit Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[ELi;S]
[ELi.S] Calibration Menu (1 to 12)
Electrical Input Slope
Adjust this value to calibrate
the slope of the input value.
-1,999.000 to 9,999.000 1.0 430
[offset
90]
0x68
(104)
1 to 0x0C
(12)
0xB (11)
- - - - 4011 float
RWES
Note: Some values will be rounded off to fit in the four-character display . Full values can
be read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set