Watlow EZ-ZONE RM Limit Module Rev C - Manual (Page 78)

Watlow EZ-ZONE ® RML Module • 75 • Chapter 5 Factory Page
RM Limit Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[SLoC]
[SLoC] Security Setting
Write Security
Set the write security clear-
ance level. The user can ac-
cess the selected level and all
lower levels.
If the Set Lockout Security
level is higher than the Read
Lockout Security, the Read
Lockout Security level takes
priority.
0 to 5 5 - - - - - - - - - - - - - - - - - - - -
[loC;l]
[LoC.L] Security Setting
Locked Access Level
Determines user level menu
visibility when security is
enabled. See Features section
under Password Security.
1 to 5 5 - - - - - - - - - - - - - - - - - - - -
No Dis-
play
Security Setting
Locked State
Current level of security
Lock (228)
User (1684)
Admin (1685) - - - - - - - - - - - - - - - - 3023 uint
R
[roll]
[roLL] Security Setting
Rolling Password
When power is cycled a new
Public Key will be displayed.
[`off] Off
[``on] On
Off - - - - - - - - - - - - - - - - - - - -
[pas;u]
[PAS.u] Security Setting
User Password
Used to acquire access to
menus made available through
the Locked Access Level set-
ting.
10 to 999 63 - - - - - - - - - - - - - - - - - - - -
[pas;a]
[PAS.A] Security Setting
Administrator Password
Used to acquire full access to
all menus.
10 to 999 156 - - - - - - - - - - - - - - - - - - - -
[ULoC]
[FCty]
Security Setting Menu
[Code]
[CodE] Security Setting
Public Key
If Rolling Password turned on,
generates a random number
when power is cycled. If Roll-
ing Password is off fixed num-
ber will be displayed.
Customer Specific 0 - - - - - - - - - - - - - - - - - - - -
[pass]
[PASS] Security Setting
Password
Number returned from calcu-
lation found in Features sec-
tion under Password Security.
-1999 to 9999 0 - - - - - - - - - - - - - - - - - - - -
Note: Some values will be rounded off to fit in the four-character display . Full values can
be read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set