Watlow EZ-ZONE RM Limit Module Rev C - Manual (Page 56)

Watlow EZ-ZONE ® RML Module • 53 • Chapter 4 Setup Page
RM Limit Module • Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
&
Read/
Write
[`oP;7]
[ op.7] Linearization (1 to 16)
Output Point 7
Set the value that will be
mapped to input 7.
-1,999.000 to 9,999.000 6.0 8036
[offset 70]
0x86 (134)
1 to 0x10
(16)
0x18 (24)
170 34024 float
RWES
[`iP;8]
[ ip.8] Linearization (1 to 16)
Input Point 8
Set the value that will be
mapped to output 8.
-1,999.000 to 9,999.000 7.0 8018
[offset 70]
0x86 (134)
1 to 0x10
(16)
0xF (15)
171 34015 float
RWES
[`oP;8]
[ op.8] Linearization (1 to 16)
Output Point 8
Set the value that will be
mapped to input 8.
-1,999.000 to 9,999.000 7.0 8038
[offset 70]
0x86 (134)
1 to 0x10
(16)
0x19 (25)
172 34025 float
RWES
[`iP;9]
[ ip.9] Linearization (1 to 16)
Input Point 9
Set the value that will be
mapped to output 9.
-1,999.000 to 9,999.000 8.0 8020
[offset 70]
0x86 (134)
1 to 0x10
(16)
0x10 (16)
173 34016 float
RWES
[`oP;9]
[ op.9] Linearization (1 to 16)
Output Point 9
Set the value that will be
mapped to input 9.
-1,999.000 to 9,999.000 8.0 8040
[offset 70]
0x86 (134)
1 to 0x10
(16)
0x1A (26)
174 34026 float
RWES
[iP;10]
[ip.10] Linearization (1 to 16)
Input Point 10
Set the value that will be
mapped to output 10.
-1,999.000 to 9,999.000 9.0 8022
[offset 70]
0x86 (134)
1 to 0x10
(16)
0x11 (17)
175 34017 float
RWES
[oP;10]
[op.10] Linearization (1 to 16)
Output Point 10
Set the value that will be
mapped to input 10.
-1,999.000 to 9,999.000 9.0 8042
[offset 70]
0x86 (134)
1 to 0x10
(16)
0x1B (27)
176 34027 float
RWES
[`CPE]
[`Set]
Compare Menu
[``Fn]
[ Fn] Compare (1 to 16)
Function
Set operator that will be
used to compare Source A
to Source B.
[`oFF] Off (62)
[`LoE] Less or Equal (1440)
[`goE] Greater or Equal
(1439)
[``nE]
Not Equal To (1438)
[```E] Equal To (1437)
[``L;t] Less Than (1436)
[``g;t] Greater Than (1435)
Off 5926
[offset 40]
0x80 (128)
1 to 0x10
(16)
9
223 28009 uint
RWES
[`toL]
[ toL] Compare (1 to 16)
Tolerance
If the difference between
Source A and Source B is
less than this value the two
will appear to be equal.
0 to 9,999.000 0.1 5930
[offset 40]
0x80 (128)
1 to 0x10
(16)
0xB (11)
230 28011 float
RWES
Note: Some values will be rounded off to fit in the four-character display .
Full values can be read with other interfaces .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EEPROM
S: User
Set