IAI America RCP2W-GRLS - Manual (Page 44)

34
4. Installation Method
[RCP2-GR3LS]
Warning Caution
x
Some of the tapped holes used for installing the gripper are through holes. Therefore, never use long
screws exceeding the effective thread length. They may damage the mechanical or electrical parts
inside the gripper.
(Note) If the gripper is installed
from the rear side, remove
the blank plugs from the
tapped holes.
Detail view of A (2:1)
Installa
tion
surfa
ce
Installati
on s
u
rface
Installa
tion
surfa
ce
Installati
on
sur
face
depth 3
depth 8
depth 3
(Same on back side)
(Same on back side)
Rear
(Use holes in
the flange)
(Effective depth 6)
Blank plug (Set screw
M4 x 5)
(Same on back side)
2- ‡3
4- ‡4.5
‡
‡
57 ‡
57
‡
59