MaxPower Corp Gamatronic Power+ RM100 User Manual
Power, Up p s s
Table of contents
Document Outline
- 1. Introduction
- 2. Battery
- 3. Operating modes
- 4. User interface
- 5. System installation
- 5.1 Cabling
- 5.2 The Power+ always requires a neutral line
- 5.3 Ground connections
- 5.4 Over-Current Protection
- 5.5 Fuses
- 5.6 Special terminal connections
- 5.7 Dry Contacts
- 5.8 Inspections to be performed prior to installation
- 5.9 Installation Procedure
- 5.10 First-time Startup
- 5.11 Checks to be performed following initial startup
- 5.12 Connection diagram
- 5.13 Configuration
- 5.14 Testing
- 6. POWER+ routine start-up
- 7. POWER+ Control Panel
- 8. Power+ menu functions in detail
- 8.1 Main Menu
- 8.2 “System” Option
- 8.3 “UPS module” Option
- 8.4 “Self-test” Option
- 8.5 “History” (logs) Option
- 8.6 “Battery” Option
- 8.7 “Alarm” Option
- 8.8 “Setup – Alarm Set” Option
- 8.9 “Setup – Module Conf.” Option
- 8.10 “Setup – Battery” Option
- 8.10.1 Setting Battery Test Voltage
- 8.10.2 Setting Battery Test Voltage Alarm
- 8.10.3 Setting Battery Current Limit
- 8.10.4 Enable/Disable Battery Current Limit
- 8.10.5 Setting Temperature Compensation
- 8.10.6 Setting Disable Temperature Compensation
- 8.10.7 Setting Absolute Maximum and Minimum Voltages
- 8.10.8 Activating the Battery Test
- 8.10.9 Setting the Automatic Battery Test Period
- 8.10.10 Setting the Automatic Battery Test Top Time
- 8.10.11 Setting the Nth Battery Capacity
- 8.10.12 Activating ‘Auto’ Test
- 8.10.13 Enabling/Disabling Options
- 8.11 Setup – Charge, Time, Site, and Password Options
- 8.12 “Setup – “Service” Option
- 8.13 “Setup – “Silicon” Option
- 8.14 “Static Switch” option
- 8.15 System Controller Setup Verification
- 9. The Power+ built-in Web interface
- 9.1 Preliminaries to use of the Web interface
- 9.2 Main Screen
- 9.3 The Main Menu and its options
- 10. SNMP agent
- 11. Wing: Wireless Control (option)
- 12. Related products
- 13. Maintenance bypass mode
- 14. Preventive Maintenance
- 15. Service and repairs
- 16. Technical specifications