MaxPower Corp Gamatronic Power+ RM100 - Manual (Page 155)

Gamatronic Electronic Industries Ltd.
POWER+ RM100, 3 X 208 V, User Guide, Release 2.7ys 139
Figure 293: Main Screen of the Power+ Web interface
9.2 Main Screen
The Main Screen (see Figure 293 above) is the first screen you see when connecting to the
GMaCi software.
The column on the left side of the screen is the Main Menu. The Main The first option in the Main
Menu brings you to the Main Screen when you are not already there.
The items in the rest of the Main Screen are described in Table 14.
Table 14: Main Screen features
I TEM D ESCRIPTION
System Summary: Informs you if attention is required or not.
GSM module status
Cellular (GSM) communication is Available / Not available.
A signal-strength indicator is displayed along with the service provider
name. Cellular communication requires the Wing module.
Site number: The site number is identified.
Date and time The current date and time are displayed.
Refresh: The time interval at which the display is periodically updated.
I TEM D ESCRIPTION
UPS image –
No active alarms at this
time. One or more alarms are
active.
Input
voltages The voltage of each input phase
is listed. All input voltages are
within range.
One or more of the input
phases has a voltage outside
of the permitted range.
Static Switch
Load on: Inverter (checkmark) /
Bypass (“x”)
Load on inverter. Load on bypass.
Battery
mode: Charging (checkmark) /
Discharging (“x”) Battery charged or
charging. Battery discharging or
discharged.
Dc voltage
Current battery / charging
voltage (Vdc). Battery voltage in
range.
Battery voltage out of range.