2 connection status of upss, 3 on/off status of upss, 4 software and communication revision – MaxPower Corp Gamatronic Power+ RM100 User Manual
Page 149: Connection status of upss, On/off status of upss, Software and communication revision, Igure, Onnection status of, Ff status of, Oftware and communication revision
Gamatronic Electronic Industries Ltd.
POWER+ RM100,
3
X
208
V, User Guide, Release 2.7ys
133
8.15.2
Connection Status of UPSs
In the screen shown in Figure 280, UPSs 1 and 2 are connected and UPSs 3 and 4 are not
connected. UPSs 5 – 9 are non-existent.
[3-second Esc > UPSs Stat]
Stat:123456789
UPS :
Figure 280: Connection status of UPSs
8.15.3
On/Off Status of UPSs
In the screen shown in Figure 281, UPSs 1 – 3 are on, UPS 4 is off, and UPSs 5 – 9 are non-
existent.
[3-second Esc > UPSs On/Off]
Stat:123456789
UPS :+++-
Figure 281: On/Off status of UPSs
8.15.4
Software and Communication Revision
The firmware revision refers to the firmware located on the main Power+ board. The
communication revision refers to the communication board revision.
[3-second Esc > SoftWare Rev]
FIRMWARE REV: SC25011208
COMM REV: 254.102
Figure 282: Software and communication revision