MaxPower Corp Gamatronic Power+ RM100 - Manual (Page 177)

Gamatronic Electronic Industries Ltd.
POWER+ RM100, 3 X 208 V, User Guide, Release 2.7ys 161
12.2 G-Eye
Figure 315: G-Eye
G-Eye adds value to your Power+:
 Option to connect external temperatures sensors, humidity sensors, and
frequency sensors.
 Inputs for ac/dc current and voltage measurements through Gamatronic sensors.
 When the measured value moves outside a user-defined range, G-Eye
immediately informs pre-selected targets of the alarm condition.
 One 4-20 mA input.
 Input dry contacts available for on/off external sensors.
 Output dry contacts for control of external devices.
 Supports TCP/IP and SNMPv2.
 Controlled shutdown of servers on ac mains power failure, with user-defined time-
delay. (*)
 Auto-wake-up of servers on restoration of ac power, after user-defined time-delay.
(*), (**)
 Include internal GSM modem (quad-band) for additional
backup/control/management without LAN dependency.
 Bi-directional control via simple SMS commands.
 Automatic response to sensed events. For example, the G4 can be programmed
to turn on an air conditioner when it senses that the room temperature has
exceeded a user-defined level.
 Notifies designated targets of alarm conditions via email, SMS, and SNMP traps.
 Double power feed for reliability.
 Internal battery backup.
 Quick
installation.
(*) Not all operating systems supported.
(**) Auto-wake-up requires "wake-on_LAN" BIOS feature on target computers. Not all operating systems
supported.
Note: G-Eye requires disconnection of the Power+ internal network card. Consult Gamatronic's
support team before ordering.