MaxPower Corp MMP Series - Manual

Going Green!!!
Power Factor is Real and now it’s
Real-Time with the MMP Power
Solution
Reach operational efficiency and conform
to new Green Energy standards with the
MMP outlet monitoring solutions.
BayTech’s metered outlet modules report
Amps, Voltage, VA, Watts, and power fac-
tor per receptacle.
Through our secure SNMP engine thresh-
olds can be set to help identify equipment
that is running inefficient.
Standard Features
Single Phase and Three Phase
20,30,50,60 Amp Support
On, Off, Reboot option
HTTPS,SSH,SSL Access
Radius, TACACS Authentication
Tool less Mounting
Unique Features
Modular Design
All Receptacles Monitored
Power Factor per Outlet
kW Hour Meter per Outlet
Current, Voltage and VA and Watts
Reliable PCB Power Distribution
Fail Functional Design
Additional Unique Features
All Circuit Breakers Monitored
Outlet Metering with Power Factor
Locking C13 Receptacle Optional
Reliable PCB Power Distribution
Integrated Sensor Inputs
Most metered power solu-
tions only monitor input
power. BayTech monitors
all circuit breakers and re-
ports via SNMP when
thresholds met.
Monitor individual outlets
and receive current, watts,
and volt-amps. Continu-
ously monitoring equip-
ment for power factor.
Reliable integrated locking
clips assure power cord
retention. Unique to the
industry and does away
with nuisance wire clips.
ISD’s (Insulation Displace-
ment) connectors are faulty
and un-reliable! All Bay-
Tech power solutions use
reliable PCB power distri-
bution.
Eliminate the need for ex-
tra environmental monitor-
ing devices. All BayTech
power solutions offer two
ports for external tempera-
ture and humidity probes.
Bay Technical Assoc. Inc. 5239 A Avenue Long Beach, MS 39560 Tel: 228-563-7334 Fax: 228-563-7335 [email protected]
Metered Outlet - MMP
230 Yuma St., Denver, CO 80223 / Tel (800) 576-3966 / Fax (800) 577-4096 / www. maxpowercorp .com
©2012 MaxPower Corporation. All rights reserved. (04/13/12)
MMP Series
MODULAR METERED POWER (OUTLET MONITORED)