Alamo TS-100A - Manual (Page 78)

© 2005 Alamo Group Inc. Section 8 - 14
Maverick (NH TS-100A,115A , 125A, 135A Asy. Man) 01/05
Exterior Wire Harness Schematic P/N 02981375A
VS . 125/F
C2
C3
SAE 4
P1
P2
Valve "B" Port to
Diverter valve P1 Port
(G/W Tie)
Valve "A" Port to
Diverter valve P2 Port
(G Tie)
4 Through holes are
mounting holes
Diverter Valve "C1" Port
to Swivel Cyl Base
End Port (G/W Tie)
Diverter Valve "C4" Port
to Swivel Cyl Rod End
Port (G Tie)
Diverter Valve "C2" Port
to Door Cyl Base End
Port (Y/W Tie)
Diverter Valve "C3" Port
to Door Cyl Rod End
Port (Y Tie)
Diverter Valve
FIGURE 31
Diverter Valve Wire Harness Connection BB of
exterior harness connects here
FIGURE 32
Connecting Oil Cooler
And Fan Assembly to Ex-
terior Wire Harness
15. Oil Cooler / Fan As-
sembly. The Oil cooler / fan
assembly is for cooling the oil
being returned from the Motor
Case Drain. The fan is con-
nected to the control box and
is turned on & off automati-
cally. It set to run on a program
that will run the fan in the cool-
ing rotation for a designated
time, then stop, reverse the
rotation (cycle to clean debris
off of cooler, then stop and
reverse the fan again and be-
gin the cycle all over again.
The connection to the
cooler on the exterior wire har-
ness is marked with code R1.
The connection from the fan
will have two wires, a Blue (+
connection) and a black (- con-
nection) (See Figure 32).
Exterior wire
harness connec-
tion marked R1
connects here