Alamo TS-100A - Manual (Page 107)

© 2005 Alamo Group Inc. Section 10 - 13
New Holland (NH TS-100A, 115A, 125A, 135A Asy. Man) 01/05
Install Front Pump & Tank Cover
Install Front Pump & Tank Cover
:
1. Install The Front Pump / Tank Cover. The front
cover and tank cover are a bolt on part. The hinges are
made onto the cover and the other half of the hinges are
made on the tank mount bracket. There are two bolts (one
each hinge) that bolt the two hinge halves together. The
is a safety cable that will bolt to the cover and the tank
mount bracket, this is to prevent the cover from opening
to far forward and hitting the ground.
There are retaining latches that will bolt to the tank
mount bracket and the cover. The holes for the fasteners
will have to drilled by the installation technician in the tank
mount brackets and the front cover. (See Figure 19, 20,
21 & 22)
FIGURE 19
FIGURE 20 FIGURE 21
FIGURE 22