Burkert Type 8694 - Manual (Page 55)

55
Operationandfunction
13. OPERATION AND FUNCTION
The positioner type 8694 has different basic and additional functions which can be configured and parameterized
via the DIP switches or the communications software.
13.1. Basic functions
The following basic functions can be activated via the DIP switches ( CUTOFF and CHARACT) or changed
( DIR.CMD).
Function Description DIP Switches OFF ON
DIR.CMD Effective direction between input
signal and set-point position 1 rise fall
CUTOFF Sealing function for position
controller 2 Sealing function off Sealing function on
CHARACT Selection of the Transfer Charac-
teristic between Input Signal and
Stroke (Correction Characteristic) 3 Linear characteristic Correction
characteristic
Table 26: Basic functions of DIP switches
The following basic function can be changed via the communications software only.
Function Description Factory setting
INPUT Entry of the standard signal input
for the set-point value
4 ... 20 mA
Table 27: Basic function of communications software
The INPUT, CUTOFF and CHARACT functions can be parameterized via the communications software.
The operating instructions for the communications software describe in detail the individual functions, as
well as parameterization and configuration.
These instructions can be found on the Internet at www.burkert.com and are also available on CD which
can be ordered by quoting identification number 804625.
English
Type 8694