Burkert Type 8694 - Manual (Page 18)

18
Systemdescription
Functions II
• Activation and parameter setting via communications software
Additional function Effect
Standard signal for set-point value
INPUT
Select set-point value standard signal
Effective direction of the actuator
DIR.ACTUATOR
Assignment of the aeration status of the actuator
chamber to the actual position.
Signal split range
SPLITRANGE
Standard signal as % for which the valve runs through
the entire mechanical stroke range.
Mechanical stroke range limit
X.LIMIT
Limit the mechanical stroke range
Opening and closing time
X.TIME
Limit the control speed
Position controller
X.CONTROL
Parameterize the position controller
Safety position
SAFE POSITION
Definition of the safety position
Signal level fault detection
SIGNAL ERROR
Configuration of signal level fault detection
Binary input
BINARY INPUT
Configuration of the binary input
Analog output
OUTPUT
Configuration of the analog output (optional)
Reset
RESET
Reset to factory settings
Table 3: Functions II
English
Type 8694