B&K Precision MDL Series - Programming Manual User Manual
Page 82
82
[:LEVel]
:RANGe
Set constant current range.
MAX
Y
:RANGe?
Query constant current range.
Y
:SLEW
Y
[:BOTH]
Set both positive and negative slew rate for
current
MAX
Y
:POSitive
Set positive slew rate for current
MAX
Y
:POSitive?
Query positive slew rate for current
Y
:NEGative
Set negative slew rate for current
Y
:NEGative?
Query negative slew rate for current
Y
:PROTection
[:STATe]
Disable or enable current protection
ON
[:STATe]?
Query current protection state
:LEVel
Set current protection level
MAX
:LEVel?
Query current protection level
:DELay
Set current protection delay time
3
:DELay?
Query current protection delay time
:TRANsient
:MODE
Set current transiton mode (CONTinuous,
PULSe, or TOGGle)
CONTinuous
:MODE?
Query current transition mode
:ALEVel
Set current transition level A
MAX
:ALEVel?
Query current transition level A
:AWIDth
Set current transition width A
500uS
:AWIDth?
Query current transiton width A
:BLEVel
Set current transition level B
MIN
:BLEVel?
Query current transition level B
:BWIDth
Set current transition width B
500uS
:BWIDth?
Query current transiton width B
:HIGH
Set the voltage specification of upper limit