B&K Precision MDL Series - Programming Manual - Manual (Page 61)

61
settings are adjusted as follows.
If existing settings are within new range, no adjustment is made.
If existing settings are outside new range, the levels are set to either the maximum or minimum value
of the new range, depending on which they are closest to.
Command Syntax [SOURce:]RESistance:RANGe
Parameters 0 to max. rated resistance
Unit Ω (ohms)
Examples RES:RANG 15 SOUR:RES:RANGE 20
Query Syntax [SOURce:]RESistance:RANGe?
Returned Parameters
Related Commands RES RES:SLEW