B&K Precision MDL Series - Programming Manual - Manual (Page 40)

40
Command Syntax SYSTem:REMote
Parameters None
Examples SYST:REM
Related Commands SYST:LOC SYST:RWL
SYSTem:RWLock
This command places the electronic load in remote mode during RS-232 operation. All front panel keys
including the Local key are disabled. Use SYSTem:LOCal to return the front panel to the local state.
Command Syntax SYSTem:RWLock
Parameters None
Examples SYST:RWL
Related Commands SYST:REM SYST:LOC
Status Commands
These commands program the electronic load’s status registers. The electronic load has five groups of
status registers:
1. Channel Status
2. Channel Summary
3. Questionable Status
4. Standard Event Status
5. Operation Status
Refer to Section 1.4 Programming the Status Registers for more information.
STATus:CHANnel?
Channel Specific
This query returns the value of the Channel Event register. The Event register is a read-only register,
which holds (latches) all events that are passed into it. Reading the Channel Event register clears it.
Query Syntax STATus:CHANnel[:EVENt]?