B&K Precision MDL Series - Programming Manual - Manual (Page 42)

42
Examples STAT:CSUM:EVEN?
Returned Parameters (register value)
Related Commands *CLS
STATus:CSUMmary:ENABle
This command sets or reads the value of the Channel Enable summary register. This command is not
channel specific and applies to the entire mainframe.
Command Syntax STATus:CSUMmary:ENABle
Parameters 0 to 255
Examples STAT:CSUM:ENAB 3
Query Syntax STATus:CSUMmary:ENABle?
Returned Parameters (register value)
Related Commands *CLS
STATus:OPERation?
This query returns the value of the Operation Event register. The Event register is a read-only register
that holds (latches) all events that are passed by the Operation NTR and/or PTR filter. Reading the
Operation Event register clears it. This command is not channel specific and applies to the entire
mainframe.
Query Syntax STATus:OPERation[:EVENt]?
Parameters None
Examples STAT:OPER:EVEN?
Returned Parameters (register value)
Related Commands *CLS
STATus:OPERation:CONDition?
This query returns the value of the Operation Condition register. This is a read-only register that holds
the real-time (unlatched) operational status of the electronic load. This command is not channel
specific and applies to the entire mainframe.
Query Syntax STATus:OPERation:CONDition?
Parameters None