B&K Precision MDL Series - Programming Manual - Manual (Page 80)

80
3.4 SCPI Command Tree
TRACe Command Summary
Commands Description Default
Channel
Specific
:TRACe
:CLEar Clear readings from buffer. Y
:FREE? Query points available and points in use. Y
:POINts Specify size of buffer (2 to 1024). 2 Y
:POINts? Query buffer size. Y
:FEED
Select source of readings (VOLTage, CURRent,
TWO).
TWO Y
:CONTrol Select buffer control mode (NEVer or NEXT). NEVer Y
:CONTrol? Query buffer control mode. Y
:FEED? Query source of readings for buffer. Y
:FILTer
[:STATe] Select the type of buffer data OFF
[:STATe]? Query the type of buffer data
:DELay Set the trigger delay time 0
:DELay? Query the trigger delay time
:TIMer Set the timer interval 1
:TIMer? Query the timer interval
:DATA? Read all data in the buffer.
CHANnel Command Summary
Commands Description Default
Channel
Specific
:CHANnel Select the electronic load channel. 1
:CHANel:ID?
This query reads the model numbers of the
modules installed in the mainframe.
Y