B&K Precision MDL Series - Programming Manual - Manual (Page 38)

38
*RST Value 0.001
Examples TRIG:TIM 0.25 TRIG:TIM MAX
Query Syntax TRIGger:TIMer? [ MINimum | MAXimum | DEFault ]
Returned Parameters
Related Commands ABOR TRIG TRIG:SOUR TRIG:DEL
System Commands
System commands control the system-level functions of the electronic load that are not directly
related to input control or measurement functions.
SYSTem:PRESet
This command returns the instrument to states optimized for front panel operation.
Command Syntax SYSTem:PRESet
Parameters None
SYSTem:POSetup
This command is used to select the power-on defaults. With RST selected, the instrument powers up to
the *RST default conditions. With the SAV0 parameter selected, the instrument powers-on to the
setup that is saved in the specified location using the *SAV command.
Command Syntax SYSTem:POSetup
Parameters RST | SAV0
*RST Value RST
Examples SYST:POS RST
Query Syntax SYSTem:POSetup?
Returned Parameters
Related Commands *RST *SAV
SYSTem:VERSion?
This query returns the SCPI version number to which the electronic load complies. The value is of the
form YYYY.V, where YYYY is the year and V is the revision number for that year.
Query Syntax SYSTem:VERSion?
Parameters None