Franklin Fueling Systems T5 Series Fuel Management System Programming Guide User Manual
Page 36
32
Group Name
Parameter Name
Parameter
Default
Description
Parameter
Input
“From” Address
your_from@address.
com
Address of sender (console).
abc
SMTP Host
your_smtp_host_
address
IP address of SMTP Host.
#
SMTP Port
25
Port address of SMTP.
#
Enable Authentication
No
Data authentication (if required).
Yes / No
Maximum Queue Size
20
Maximum size of queue in Megabytes.
Retry Timeout
3600
Time, in seconds, that the console will wait before attempting
to resend the message.
Watchdog Timeout
30
Time, in seconds, that the console self-monitoring program
waits when it expects and error due to software or power
quality problems.
Enable Debugging
(No)
Select Yes if you would like more status information to be
stored in the Messages file.
Yes / No
System Sentinel Anyware
This section will be filled out automatically upon the initial polling by System Sentinel Anyware.
Events
Group Name
Parameter Name
Parameter Default
Description
Options
Rules
: Rules are a logic-based programming that are driven off of “If” based Events and “Then” Based actions. Essentially: “If” this event occurs
“Then” the console will perform a specified action.
Rule – New Rule #
Name
(New Rule #)
Given name of rule.
abc#
Enabled
(No)
Yes to enable rule.
Yes/No
Events: Events can be both “If” logic and “Or” Logic. Therefore you can have several events trigger the same action. “If” Event 1 “Or” Event 2
occurs the console will perform a specified action.
Event
Type
(New Alarm Occurred)
Event type that triggers action.
New Alarm Occurred;
Alarm Status Changed;
Application Event;
Scheduled
Category
(Any)
System that event occurs in to trigger
action.
Any;
System;
FMS;
VRM;
SCM;
Other
Code
(Any)
Error/Trouble Event Code that triggers
action.
(see below)
Device
(Any)
Device that created the alarm
condition.
Various
State
(Any)
State of alarm to trigger action.
Various
Action: Actions are sequentially “Then” / ”And” driven. Therefore, “If” an Event occurs “Then” the console will perform Action 1 and then Action
2 and then Action 3.
Action
Type
(e-mail)
Action that will occur upon event
E-mail, Report, Relay, Tank
Testing, Line Testing, Sentinel
mode, Reconciliation, sound,
Notify SSA, Sample input,
STP Control, Generator
Address
your,[email protected]
Where it will send e-mail
Contact
Generated
What e-mail format is used
Generated, Text, HTML, Other
Template
Text
E-mail Template
HTML, Text, short text